AT35/3.5 – Aluminium
AT35/3.5 is an aluminium staircase stringer trim available in 2 finish options to suit our aluminium stair nosings.
Typical Installation: To mask the cut edge of stair nosings and floor coverings and as a trim detail for landings and areas where there is no foot traffic to the leading edge.
AT35/3.5 is available in stock lengths for use as a detail around landings or areas with no foot traffic, or in pre-formed corners 360mm x 360mm in 83° and 90° to fit onto the side of steps.
Technical Specification
Suitability
All contract situations.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2715 mm
Visible Surface When Installed
35 mm
Light Reflective Value (Finish)
75.55 Find out more
Suitability
All contract situations.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2715 mm
Visible Surface When Installed
35 mm
Light Reflective Value (Finish)
65.4 Find out more
Please select the sample you'd like for this product