BT50 – Brass
BT50 is a brass staircase stringer trim available in CAT’s four signature brass finishes to suit our brass stair nosings. Supplied with a separate uPVC fixing tab.
Typical Installation: To mask the cut edge of stair nosings and floor coverings and as a trim detail for landings and areas where there is no foot traffic to the leading edge.
BT50 is available in stock lengths for use as a detail around landings or areas with no foot traffic, or in pre-formed corners 360mm x 360mm in 83° and 90° to fit on to the side of steps.
Technical Specification
Suitability
All contract situations.
Please Note: Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2700 mm
Visible Surface When Installed
50 mm
Light Reflective Value (Finish)
9.15 Find out more
Suitability
All contract situations.
Please Note: Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2700 mm
Visible Surface When Installed
50 mm
Light Reflective Value (Finish)
29.55 Find out more
Suitability
All contract situations.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2700 mm
Visible Surface When Installed
50 mm
Light Reflective Value (Finish)
59.55 Find out more
Suitability
All contract situations.
Application
Installed prior to the stair nosings and the floor coverings to mask their cut edges, Stock lengths are used as a detail around landings and other areas where there is no foot traffic. Welded angles will fit left or right side of steps. Installation guide available.
Supplied in Stock Lengths
2715 mm
Visible Surface When Installed
50 mm
Light Reflective Value (Finish)
71.45 Find out more
Finishes
Antique Bronze
Antique Brass
Satin Brass
Polished Brass
Please select the sample you'd like for this product