FPA 22.5×3 – Aluminium Tread Insert

FPA22.5×3 aluminium stair tread inserts are designed to define and provide slip resistance to the edge of the stair treads. Available in a range of finishes.

Typical installations include timber steps and stone steps.

Stair insert plates are designed to be rebated, in 2 or 3 strips per step, to delineate the edge of stairs within buildings. They are intended for use in dry environments where the predominant direction of foot traffic is at 90 degrees to the strips inserted. When fitted as recommended in our Installation Guides, this product has been tested and found to provide a low slip potential value after installation, with an average PTV of 72 in dry conditions. Should you require a product for external or a damp environment stair installation, please call our sales office for technical advice and guidance.

FPA22.5×3 is also suitable for use as a wall or floor inlay strip to create designs and patterns on floors and walls.

Tolerance allowance should always be made when rebating to allow for any variation in size. Samples are available prior to rebate.

Please Note: Finishes, except Mill Aluminium, are applied to the top visible edge only. Where the finish is also required on another aspect of the profile, please consult with the sales office.