Triangular Solid Brass Stair Rods
Triangular brass stair rods are a stylish alternative to traditional round rods. Triangular stair rods have a 22mm face and a choice of four finials. Each stair rod is supplied with two hinged eyes.
NBS Source
Technical Specification
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Suitability
Commercial or domestic locations.
Application
'The Akeman Collection' of stair rods are designed to be fitted as a decorative finish to any stairs.
Dimensions
22 mm x 16 mm x 16 mm
Finials Available
Fleur-de-lys (Triangular), Plain (Triangular), Spear (Triangular), Trefoil (Triangular)
Fixing
Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8"). For concrete stairs use rawl plugs for screw fixings. When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws. Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.
Important Information
Stair rods are supplied one rod and two hinged fixing eyes per tread. Measuring Tip - Add at least 100 mm (3.9") to runner size.
Handling
Always wear gloves when handling stair rods. Do not handle with bare hands as sweat will cause rapid tarnishing of the finish.
Finish Notes
Please refer to the CAT product catalogue for details of which finishes are available on which diameter of rods/triangular rods. Antique Brass and Antique Bronze finishes are a chemically applied process and are hand finished with a variance from batch to batch. They are designed to create an aged, unpolished effect.
Finishes
Polished Brass
Satin Brass
Antique Bronze
Antique Brass
Chrome
Satin Chrome
Please select the sample you'd like for this product