Kliks Slim Twin Top – Stainless Steel
Stainless Steel Kliks Slim Twin Top profiles are designed to adjoin two floors at the same level. Manufactured from an aluminium carrier with a bonded Stainless Steel top.
Stainless Steel Kliks Slim Twin Top profiles are installed using uPVC bases with interlocking barb design for height adjustment when tops are secured. Product references: KKSBP9.5, KKSBP12, KKSBP15 and KKSBP20.
The selected base is fitted to the subfloor & floor coverings are then installed allowing for natural expansion. The top profile is then clipped over the base to the desired height, covering the expansion & protecting the raw edge of the flooring. Allows up to 10 mm expansion on each side.
This profile can be fitted without a base when ordered with Stick Fix tape pre-applied to the underside of the horizontal surface.
Stainless Steel Kliks Slim Twin Top profiles are available in the following finishes:
Bright Stainless Steel – Code: KKSL225
Brushed Stainless Steel – Code: KKSL235
Please Note: Kliks Slim base profiles ‘KKSBP’s are supplied separately.
Technical Specification
Suitability
Medium to heavy contract situations such as for use in hotels, pubs, cafes, clubs, commercial offices, shops, schools and public building, as well as for quality domestic installations.
Application
Installed in combination with one of five compatible bases to protect the edges of the floor coverings. The chosen KSBP base is firmly affixed to the substrate floor then the top pressed down over it to engage interlock feature between the two profiles. Ideal for finishing timber, ceramic tiles, laminates and any other flooring that requires expansion.
Lengths Available
1000, 2000 mm
Visible Surface When Installed
35 mm
Standard Supply
Undrilled.
Light Reflective Value (Finish)
53.7 Find out more
Compatible Bases
KKSBP9.5, KKSBP12, KKSBP15, KKSBP20
Suitability
Medium to heavy contract situations such as for use in hotels, pubs, cafes, clubs, commercial offices, shops, schools and public building, as well as for quality domestic installations.
Application
Installed in combination with one of five compatible bases to protect the edges of the floor coverings. The chosen KSBP base is firmly affixed to the substrate floor then the top pressed down over it to engage interlock feature between the two profiles. Ideal for finishing timber, ceramic tiles, laminates and any other flooring that requires expansion.
Lengths Available
1000, 2000 mm
Visible Surface When Installed
35 mm
Standard Supply
Undrilled.
Light Reflective Value (Finish)
Compatible Bases
KKSBP9.5, KKSBP12, KKSBP15, KKSBP20
Please select the sample you'd like for this product